0 CART
items in your cartto quote
Ooops no items were found.
Try something else.
Ok
Loading…
To cart
Quote Me
0
ZAR

ZAR Aqua Gloss Water-Based Interior Polyurethane, 1 Gal.

Category Interior Polyurethane
799072
ZAR

ZAR Aqua Gloss Water-Based Interior Polyurethane, 1 Gal.

Item Code: 799072
Category Interior Polyurethane

Description

This nonyellowing, environmentally safe, clear wood finish is specially formulated to protect and beautify cabinets, furniture, wall paneling, woodwork, and moderately used floors. The water-based polyurethane dries crystal clear, making it an ideal finish to use over light-colored wood or white stains. Aqua Zar meets all environmental standards for low emission of solvent vapors. Use on properly prepared new wood. Remove any wax, lacquer, shellac, or paint completely from old surfaces before finishing. Do not use steel wool. Follow can instructions. If staining, apply a good quality oil-based or water-based stain. Apply with a clean synthetic fiber or foam brush, lamb's wool applicator or pad. Do not apply with a roller. Follow all directions on the label especially when applying to floors. Allow 24 hours to dry. Recommended to use Zar original polyurethane or ultra polyurethane for heavily used floors. Covers approximately 400 to 425 Sq. Ft. per gallon. Transparency: Clear.
Weight

1442.6lb

Height

48in

Width

33.6in

Length

42in

Base Material

Water-Based

Brand

ZAR

Category

Interior Polyurethane

Clean-Up

Soap & Water

Container Size

1 gal.

Coverage Area

425 Sq. Ft.

Dries To Touch

30 min.

Finish

Gloss

Number Of Recommended Coats

3 Coats

Time Before Recoating

2 Hr.

Add to favorites list
Compare
ZAR

ZAR Aqua Gloss Water-Based Interior Polyurethane, 1 Gal.

Category Interior Polyurethane
799072
ZAR

ZAR Aqua Gloss Water-Based Interior Polyurethane, 1 Gal.

Item Code: 799072
Category Interior Polyurethane

Description

This nonyellowing, environmentally safe, clear wood finish is specially formulated to protect and beautify cabinets, furniture, wall paneling, woodwork, and moderately used floors. The water-based polyurethane dries crystal clear, making it an ideal finish to use over light-colored wood or white stains. Aqua Zar meets all environmental standards for low emission of solvent vapors. Use on properly prepared new wood. Remove any wax, lacquer, shellac, or paint completely from old surfaces before finishing. Do not use steel wool. Follow can instructions. If staining, apply a good quality oil-based or water-based stain. Apply with a clean synthetic fiber or foam brush, lamb's wool applicator or pad. Do not apply with a roller. Follow all directions on the label especially when applying to floors. Allow 24 hours to dry. Recommended to use Zar original polyurethane or ultra polyurethane for heavily used floors. Covers approximately 400 to 425 Sq. Ft. per gallon. Transparency: Clear.
Weight

1442.6lb

Height

48in

Width

33.6in

Length

42in

Base Material

Water-Based

Brand

ZAR

Category

Interior Polyurethane

Clean-Up

Soap & Water

Container Size

1 gal.

Coverage Area

425 Sq. Ft.

Dries To Touch

30 min.

Finish

Gloss

Number Of Recommended Coats

3 Coats

Time Before Recoating

2 Hr.

Add to favorites list
Compare
SEARCH ×