0 CART
items in your cartto quote
Ooops no items were found.
Try something else.
Ok
Loading…
To cart
Quote Me
0
Ergodyne

Squids 3791 Sleever/Connecting Bar Lock Collar with Tool Attachment Point, 7 lb Max Working Capacity, 0.87" Long, Silver

Category Hand Tool Organizers & Belts
 
Contract Item
EGO19107 EGO19107
EGO19107 EGO19107
EGO19107 EGO19107
EGO19107 EGO19107
Ergodyne

Squids 3791 Sleever/Connecting Bar Lock Collar with Tool Attachment Point, 7 lb Max Working Capacity, 0.87" Long, Silver

Item Code: EGO19107
Category Hand Tool Organizers & Belts
Manufacturer TENACIOUS HOLDINGS, INC.
  • Designed to be installed on connecting, sleever or wrecking bars to create a tool attachment point for tethering.
  • Locking collar allows bar to be safely holstered by providing a catchpoint when stored on a tool belt.
  • Slide locking collar onto connecting, sleever or wrecking bar and tighten dual set screws with included hex key to secure into place.
  • Galvanized steel construction is durable and prevents corrosion in extreme environments.
  • Collar features swiveling connection point for tethering and prevents tangles and binds when used with a tool lanyard.
  • Middle swiveling attachment point can be removed at any point allowing the solution to be used purely as a holstering collar.

Description

The Squids 3791 Locking Collar with Tool Attachment Point installs onto connecting, sleever and wrecking bars to create a retrofit attachment point for tethering tools up to 7 lbs, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on connecting, sleever and wrecking bars with no captive holes. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult. To install, slide the locking collar onto a connecting, sleever or wrecking bar and use the included hex key to tighten the dual set screws to secure into place. Built with strong galvanized steel, this durable locking collar is corrosion-resistant in extreme environments. The locking collar allows the bar to be safely holstered by providing a catchpoint when stored on a tool belt and when working at heights. The collar features a swiveling connection point in the middle for tethering and prevents tangles and binds when used with a lanyard. This tool attachment portion of the locking collar can be removed and the tool collar can be used solely for proper holstering. This tool tether attachment is built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. Ideal for those working the iron/steel trades and tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk. This locking collar is compatible with straight-shafted round or hex connecting, sleever and wrecking bars ranging from 0.75" and 0.88". Each size comes with one locking collar and a hex key for installation. Fastener Style: Collar; Lanyard Color(s): Silver; Length: 0.87"; Safety Breakaway Connector: No.
Made In

TW

UNSPSC Code

27112800

Weight

0.33lb

Height

3in

Width

4.75in

Length

8in

Brand

Ergodyne

Category

Hand Tool Organizers & Belts

Compliance Standards

ANSI/ISEA 121-2018-Third party certified to a 7 lbs/3.2 kg maximum working capacity

Fastener Material

Steel

Fastener Style

Collar

Global Product Type

Tool Lanyard Accessories

Lanyard Color(s)

Silver

Lanyard Material(s)

Steel

Length

0.87"

Maximum Safe Working Capacity (lb)

7 lb

Post-Consumer Recycled Content Percent

0%

Pre-Consumer Recycled Content Percent

0%

Product Biodegradability Indicator

N

Product Compostability Indicator

N

Safety Breakaway Connector

No

Total Recycled Content Percent

0%

Add to favorites list
Compare

Recommendations

Ergodyne

Squids 3791 Sleever/Connecting Bar Lock Collar with Tool Attachment Point, 7 lb Max Working Capacity, 0.87" Long, Silver

Category Hand Tool Organizers & Belts
 
Contract Item
EGO19107 EGO19107
EGO19107 EGO19107
EGO19107 EGO19107
EGO19107 EGO19107
Ergodyne

Squids 3791 Sleever/Connecting Bar Lock Collar with Tool Attachment Point, 7 lb Max Working Capacity, 0.87" Long, Silver

Item Code: EGO19107
Category Hand Tool Organizers & Belts
Manufacturer TENACIOUS HOLDINGS, INC.
  • Designed to be installed on connecting, sleever or wrecking bars to create a tool attachment point for tethering.
  • Locking collar allows bar to be safely holstered by providing a catchpoint when stored on a tool belt.
  • Slide locking collar onto connecting, sleever or wrecking bar and tighten dual set screws with included hex key to secure into place.
  • Galvanized steel construction is durable and prevents corrosion in extreme environments.
  • Collar features swiveling connection point for tethering and prevents tangles and binds when used with a tool lanyard.
  • Middle swiveling attachment point can be removed at any point allowing the solution to be used purely as a holstering collar.

Description

The Squids 3791 Locking Collar with Tool Attachment Point installs onto connecting, sleever and wrecking bars to create a retrofit attachment point for tethering tools up to 7 lbs, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on connecting, sleever and wrecking bars with no captive holes. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult. To install, slide the locking collar onto a connecting, sleever or wrecking bar and use the included hex key to tighten the dual set screws to secure into place. Built with strong galvanized steel, this durable locking collar is corrosion-resistant in extreme environments. The locking collar allows the bar to be safely holstered by providing a catchpoint when stored on a tool belt and when working at heights. The collar features a swiveling connection point in the middle for tethering and prevents tangles and binds when used with a lanyard. This tool attachment portion of the locking collar can be removed and the tool collar can be used solely for proper holstering. This tool tether attachment is built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. Ideal for those working the iron/steel trades and tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk. This locking collar is compatible with straight-shafted round or hex connecting, sleever and wrecking bars ranging from 0.75" and 0.88". Each size comes with one locking collar and a hex key for installation. Fastener Style: Collar; Lanyard Color(s): Silver; Length: 0.87"; Safety Breakaway Connector: No.
Made In

TW

UNSPSC Code

27112800

Weight

0.33lb

Height

3in

Width

4.75in

Length

8in

Brand

Ergodyne

Category

Hand Tool Organizers & Belts

Compliance Standards

ANSI/ISEA 121-2018-Third party certified to a 7 lbs/3.2 kg maximum working capacity

Fastener Material

Steel

Fastener Style

Collar

Global Product Type

Tool Lanyard Accessories

Lanyard Color(s)

Silver

Lanyard Material(s)

Steel

Length

0.87"

Maximum Safe Working Capacity (lb)

7 lb

Post-Consumer Recycled Content Percent

0%

Pre-Consumer Recycled Content Percent

0%

Product Biodegradability Indicator

N

Product Compostability Indicator

N

Safety Breakaway Connector

No

Total Recycled Content Percent

0%

Add to favorites list
Compare

Recommendations

SEARCH ×