0 CART
items in your cartto quote
Ooops no items were found.
Try something else.
Ok
Loading…
To cart
Quote Me
0
HILLMAN

Hillman 1/8 In. Long/Short Drive Hollow Wall Anchor (100-Count)

Category Hollow Wall Anchor
 
Contract Item
DIB753973
HILLMAN

Hillman 1/8 In. Long/Short Drive Hollow Wall Anchor (100-Count)

Item Code: DIB753973
Category Hollow Wall Anchor
  • Greater holding power than nails and screws in hollow wall
  • Common applications include mirrors, pictures, bathroom fixtures, curtains, etc.
  • Fixtures can be easily removed and later replaced without disturbing the anchor

Description

Primarily used in drywall, the Drive Wall Anchor is a medium duty fastener for use in drywall, plaster and tile. The tip has a drive point to pierce drywall easily; no pre-drilling is required. The two prongs on the head of the shell, prevent the anchor from rotating during expansion. When the anchor is fully expanded, spider-like legs draw tightly against the backside of the wall. Once the body of the anchor is installed, the screw can be changed without disrupting the anchor.
Weight

1.99lb

Height

3.25in

Width

4.3in

Length

4.9in

Brand

HILLMAN

Category

Hollow Wall Anchor

Diameter

1/8 In. Long/Short

Drill Size

1/4 in.

Finish

Zinc

Head Type

Truss

Material

Steel

Wall Thickness

1/8 to 13/16 In.

Add to favorites list
Compare
HILLMAN

Hillman 1/8 In. Long/Short Drive Hollow Wall Anchor (100-Count)

Category Hollow Wall Anchor
 
Contract Item
DIB753973
HILLMAN

Hillman 1/8 In. Long/Short Drive Hollow Wall Anchor (100-Count)

Item Code: DIB753973
Category Hollow Wall Anchor
  • Greater holding power than nails and screws in hollow wall
  • Common applications include mirrors, pictures, bathroom fixtures, curtains, etc.
  • Fixtures can be easily removed and later replaced without disturbing the anchor

Description

Primarily used in drywall, the Drive Wall Anchor is a medium duty fastener for use in drywall, plaster and tile. The tip has a drive point to pierce drywall easily; no pre-drilling is required. The two prongs on the head of the shell, prevent the anchor from rotating during expansion. When the anchor is fully expanded, spider-like legs draw tightly against the backside of the wall. Once the body of the anchor is installed, the screw can be changed without disrupting the anchor.
Weight

1.99lb

Height

3.25in

Width

4.3in

Length

4.9in

Brand

HILLMAN

Category

Hollow Wall Anchor

Diameter

1/8 In. Long/Short

Drill Size

1/4 in.

Finish

Zinc

Head Type

Truss

Material

Steel

Wall Thickness

1/8 to 13/16 In.

Add to favorites list
Compare
SEARCH ×